When it comes to electric scooters, beating Razor electric scooters is really a tough job. They are very popular for great quality electric scooters because they are quite efficient. Yes, if you are reading this content then you know this by now. In terms of maintaining quality Razor is always going to attract our eyes. But still, there are some problems all the time like charge. So, today we are going to talk about how to charge a razor scooter without the charger?
There are times when you don’t have a charger within your reach. Maybe you are going on a travel with your Razor scooter and when you don’t have a charger in hand, your traveling experience may not be so much fun at all. So, to help you to avoid this problem, we are going to provide you with some important tips on how you can charge a Razor scooter without the charger.
How to Charge a Razor Scooter Without the Charger?
In this part of the content, we are going to talk about the three simple and easy ways you can charge a razor scooter without using the charger. These three techniques always have some bad effects on the battery. But they work just fine. Let’s check them out.
First Technique: by Removing the Battery
This is one of the most popular and effective ways to charge your razor scooter without the charger. The technique is a little tough for many people. Beginners face difficulty trying this technique. Anyway, if you are facing a problem with removing the battery, you can always check out the manual given with the scooter package.
1st Step: Unscrew the Scooter and Connect the Battery
To begin with, you need to remove the screws and remove the battery. After removing the screws, you will find two different wires attached to the engine of the scooter. The wires are connected with clips. Try to remove the wires gently.
2nd Step: Charge the Battery
After that place your battery in a dry place so that you can charge it. Try to figure out how much time you are willing to spend on charging the battery. Connect the battery with your alternative power source and then charge it. After a single charge, you can reinstall the battery again. This is always a great technique for charging your scooter.
Second Technique: Recharging With Portable Car Jumper
This is probably the fastest way of charging your battery. If you own a car jumper, you can easily charge your battery. Car jumpers usually have large batteries built inside it. So, it can produce a higher voltage so that the battery is fully charged.
1st Step: Connect the Battery With the Car Jumper and Connect the Battery
So, to begin with, it, you need to connect the battery with the car jumper. First, hook up the jumpers cable with the batteries electrode. There you will find two different electrodes. In this case, the black cable goes for the negative electrode and the red one goes for a positive electrode. After connecting, make sure you have checked everything if it’s alright.
2nd Step: Charge the Battery
After connecting the jumper, turn it on. When electricity starts to flow, keep it for 15 to 20 minutes. In this case, the charging mainly depends on the battery type. There are mainly three types of batteries. We have talked about them in another content of ours. When the battery gets hot, you can say that it is half the final mark. If the battery gets too hot, it will shorten its life. Anyway, the modern digital portable charger may come in handy in this case. You will get all the updates on charging your battery.
Third Technique: Using a Variable Power Supply
Using a variable power supply can also be another way for charging your electric scooter without the charger. You can say a variable power supply is a handy gadget for any scooter owner. You will find it in any hardware store. With this gadget, you can set a limit to the electric flow and charge the product with ease. First, you need to connect the battery with the power supply.
1st Step: Connect the Battery
Connecting the variable power supply is not very tough. You can connect the battery just like the previous ways we talked about.
2nd Step: Set the Voltage
After connecting it with the battery, you need to set the voltage. Usually, you need to set the voltage to 4.2V/cell. Now, you cannot assume the number of cells in your Razor scooter. You have to contact the manufacturer or check out the user manual.
3rd Step: Set the Current
After that, you need to set the current. Depending on the capacity of your cell, you need to set the current flow up to 20%.
4th Step: Charge the Battery
After that, start charging your battery. When the current rate falls, you can say that the battery is charging. When the rate reached 4-3%, you can say that it is up to the mark. After that, remove the charging connection.
So, we have just reached the final verdict of this content. Razor electric scooters are very popular. But when you don’t have a charger in hand, you need to find a way to charge your scooter’s battery. We have talked about three popular techniques on our sleeves. I hope, this will help you to charge your scooter battery.